Services/Rust Removal
Rust Removal
Strip rust down to clean, bare metal — no media, no chemicals
Get a Free BidLaser rust removal uses a focused beam to ablate — essentially vaporize — rust and surface oxidation directly off a metal part, without media blasting or chemical strippers.
Because clean bare metal reflects the laser differently than rust does, the process tends to be self-limiting: once a spot is down to clean metal, it stops absorbing energy the same way, which gives an operator more control than a sandblaster or grinder over how much material comes off.
Why laser cleaning for this
No sand or abrasive media to contain, recover, or dispose of afterward
No chemical runoff or fumes from rust-stripping solvents
Precise, controllable depth — better suited to thin or delicate metal than sandblasting
No dust cloud, which matters when working near other equipment, vehicles, or occupied buildings
Common uses
- Structural steel beams and columns
- Gates, railings, and fencing
- Tools, equipment, and machinery
- Agricultural and farm equipment
- Marine hardware and fittings
- Automotive frames and undercarriages
- Molds and dies with surface corrosion
How it works
- 1
Assess the part or structure and the severity of the rust to plan the approach.
- 2
Run the laser over the affected area, working in passes to ablate the rust layer by layer.
- 3
Inspect the surface to confirm it's down to clean, bare metal.
- 4
Recommend a primer or protective coating where appropriate, since bare steel exposed to air and moisture can begin to oxidize again.
Frequently asked questions
Does laser rust removal damage the underlying metal?
When properly calibrated, the laser targets the rust layer and leaves the base metal intact. Because clean steel responds to the laser differently than rust does, the process tends to be more self-limiting than abrasive blasting — though very thin or heavily pitted metal still needs a careful approach.
Will the metal rust again after it's cleaned?
Bare steel exposed to air and moisture can start to oxidize again over time, the same as after any rust removal method. We typically recommend priming or coating the surface soon after cleaning to protect it.
Is it safe to use on outdoor or agricultural equipment?
Yes — it's commonly used on structural and mechanical equipment, and leaves no chemical residue behind.
How long does a job take?
It depends on the surface area and how severe the rust is. Send us photos or video through our quote form and we'll get you an estimate.
Other services
Ready to get a bid for rust removal?
Send photos or video for a remote quote, or schedule an in-person visit — free, no obligation.
Get a Free Bid